Volume 5, Issue 4, December 2019, Page: 91-95
First-principles Analysis of SiC/Al Composites Interface
Qipeng Wang, School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, China
Junlei Shi, School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, China
Received: Aug. 30, 2019;       Accepted: Oct. 7, 2019;       Published: Oct. 17, 2019
DOI: 10.11648/j.ijfmts.20190504.11      View  41      Downloads  8
Abstract
The interface of SiCp/Al composites is an important factor affecting the properties of materials, Different interface layers have different interface bonding strengths, which have different effects on the properties of SiCp/Al composites. In this paper, the possible binding energy of interface in SiCp/Al composites is studied, then the influence of the interfacial binding energy on the SiCp/Al composites is analyzed, and the method of controlling the interface of SiCp/Al composites is proposed. Firstly, three interface models that may exist in SiCp/Al composites were constructed in Material Studio software, and the model structure was optimized, then the first-principles simulation of the optimized interfaces model of SiCp/Al composites was carried out, and the interfacial bonding energy of SiC-Al, SiC-SiO2-Al and SiC-Al2O3-Al was calculated respectively. The order of the interfacial binding energy was: SiC(100)-Al(100) < SiC(100)-SiO2 (100)-Al(100) < SiC(100)-Al2O3 (100)-Al(100). It can be known from the simulation results that the interfacial bonding energy of the interface layer containing the oxide is large, since the oxide can improve the wettability between the matrix and the reinforcement. Therefore, in order to obtain a well-bonded SiCp/Al composite, the SiC particles are usually surface-modified to regulate the interface of the SiCp/Al composite. Thereby, the SiCp/Al composite material with high interface bonding strength and excellent performance is obtained.
Keywords
SiCp/Al Composite, First Principle, Interface, Simulation
To cite this article
Qipeng Wang, Junlei Shi, First-principles Analysis of SiC/Al Composites Interface, International Journal of Fluid Mechanics & Thermal Sciences. Vol. 5, No. 4, 2019, pp. 91-95. doi: 10.11648/j.ijfmts.20190504.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Zheng W, Wang Y J, Zhou M, et al. Material deformation and removal mechanism of SiCp/Al composites in ultrasonic vibration assisted scratch test [J] Ceramics International, 2018, 44 (13): 15133-15144.
[2]
Mizuuchi K, Inoue K, Agari Y, et al. Processing of Al/SiC composites in continuous solid-liquid co-existent state by SPS and their thermal properties [J] Composites: Part B, 2012, 43: 2012-2019.
[3]
Wang D M, Zheng Z X, Lv J, et al. Enhanced thermal conductive 3D-SiC/Al-Si-Mg interpenetrating composites fabricated by pressureless infiltration [J] Ceramics International, 2017, 43: 1755-1761.
[4]
Xiang J F, Xie L J, Gao F N, et al. Diamond tools wear in drilling of SiCp/Al matrix composites containing Copper [J] Ceramics International, 2018, 44 (5) 5341-5351.
[5]
Li C P, Wang Z G, Wang H Y, et al. Fabrication of Nano-SiC Particulate Reinforced Mg-8Al-1Sn Composites by Powder Metallurgy Combined with Hot Extrusion [J] Journal of Materials Engineering and Performance, 2016, 25 (11) 5049-5054.
[6]
Yang W S, Chen G Q, Wu P, et al. Electrical Discharge Machining of Al 2024-65 vol% SiC Composites [J] Acta Metallurgica Sinica-English Letters, 2017, 30 (5) 447-455.
[7]
Wei Z J, Ma P, Wang H W, et al. The thermal expansion behavior of SiCp/Al-20Si composites solidified under high pressures [J] Materials and Design, 2015, 65: 387-394.
[8]
Zhang L J, Yang D L, Qiu F, et al. Effects of reinforcement surface modification on the microstructures and tensile properties of SiCp/Al 2014 composites [J] Materials Science and Engineering A, 2015, 624: 102-109.
[9]
Huang S T, Guo L, He H H, et al. Study on characteristics of SiCp/Al composites during high-speed milling with different particle size of PCD tools [J] International Journal of Advanced Manufacturing Technology, 2018, 95: 2269-2279.
[10]
Hu F, Xie L J, Xiang J F, et al. Finite element modelling study on small-hole peck drilling of SiCp/Al composites [J] The International Journal of Advanced Manufacturing Technology, 2018, 96: 3719-3728.
[11]
Xiang J F, Pang S Q, Xie L J, et al. Mechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites [J] Materials, 2018, 252 (11): 1-21.
[12]
Mao X Z, Hong Y, Wang B H, et al. Fabrication, microstructures and properties of 50 vol.% SiCp/6061Al composites via a pressureless sintering technique [J] Powder Metallurgy, 2018, 9: 1-9.
[13]
Zha H T, Feng P F, Zhang J F, et al. Material removal mechanism in rotary ultrasonic machining of high-volume fraction SiCp/Al composites [J] The International Journal of Advanced Manufacturing Technology, 2018, 97: 2099–2109.
[14]
Segall M D, Lindan Philip J D, Probert M J. First-principles simulation: ideas, illustrations and the CASTEP code [J] J. Phys.: Condens. Matter 14 (2002) 2717–2744.
[15]
Dongare A M, Zhigilei L V, Rajendran A M. et al. Interatomic potentials for atomic scale modeling of metal–matrix ceramic particle reinforced nanocomposites [J]. Composites Part B, 2009, 40 (6): 461-467.
[16]
Dierk Raabe. Computational materials science: the simulation of materials, microstructures and properties. Weinheim: Wiley-VCH Verlag Gmb H, 1998, 47-109.
[17]
Wang J S, Horsfield A, Lee Peter D, et al. Heterogeneous nucleation of solid Al from the melt by Al3Ti: Molecular dynamics simulations. Phys. Rev. B, 2010, 82: 144203.
[18]
Milman V, Winkler B, White J A, et al. Electronic structure, properties, and phase stability of inorganic crystals: A pseudopotential plane-wave study. Int. J. Quantum Chem., 77, John Wiley & Sons, Inc., 2000, 895-910.
[19]
Li Y F, Gao Y M, Xiao B. Theoretical calculations on the adhesion, stability, electronic structure, and bonding of Fe/WC interface [J]. Applied Surface Science 257 (2011) 5671-5678.
[20]
Luo X, Qian G F, Wang E G, et al. Molecular-dynamics simulation of Al/SiC interface structures [J]. Physical Review B, 1999, 59 (15): 10125-10131.
[21]
Siegel Donald J, Hector Jr Louis G, Adams James B. Adhesion, stability, and bonding at metal/metal-carbide interfaces: Al/WC [J]. Surface Science 498 (2002) 321–336.
[22]
Guo S W, Li L B, Zhang G Y, et al. Adhesion Analysis of Electroless Ni Coating on SiCp/Al Composite Mirror Substrate [J]. Rare Metal Materials and Engineering, 2008, 37 (6): 0960-0963.
[23]
Subhash Singh, Kaushik Pal. Effect of surface modified silicon carbide particles with Al2O3 and nanocrystalline spinel ZnAl2O4 on mechanical and damping properties of the composite [J]. Materials Science & Engineering A. 2015, 644: 325–336.
[24]
Hu M, Zhang Y L, Tang L L, et al. Surface modifying of SiC particles and performance analysis of SiCp/Cu composites [J]. Applied SurfaceScience. 2015, 332: 720–725.
[25]
Ortega-Celaya F, Pech-Canul M I, López-Cuevas J. Microstructure and impact behavior of Al/Si Cp composites fabricated by pressureless infiltration with different types of SiCp. Materials [J]. Processing Technology, 2007. 183: 368-373.
Browse journals by subject